Operating at a maximum of just 24dB(A) and with a compact design, MF100S is ideal for applications where installation and extraction needs to be powerful yet discreet. This particular model; the MF100T, features an over-run timer that keeps the fan running for a period of up to 20 minutes (set upon installation), after power off, to ensure all moisture or stale air is extracted. This particular model; the MF100S is the basic On/Off version. It can be paired with Manrose 1361 remote humidistat and Manrose 1350 speed controller. Key Features Class II - double insulation - no earth required. Fully building code compliant. Fully BEAB approved Rated to IPX4. Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction

Genuine Manrose branded product. High quality ball bearing, long life motor, continuously rated and warranted for a minimum of 30,000 hours or 3 years The MF100S inline fan is fully BEAB approved, building regulations compliant and has is IPX4 rated. Manrose MF100S Features Times I have been up in the loft, I can feel by weight and noise that a lot of water sits in the ducting, far from ideal.The Manrose MF100T is a powerful inline extractor fan which is ductable up to 12m. An inline fan is installed in the loft or ceiling void above the bathroom (or kitchen etc). Ducting is attached to each end of the fan with one length going to an internal grille in the ceiling of the bathroom and the other going to a grille on the external wall, soffit or roof. The only negative I can see might be noise, in that the fan will be directly above the shower (Currently it is above the landing cupboard), BUT while the shower is on you won't hear it, and hopefully if it's way more efficient I won't need to have the timer at max for 25 minutes, perhaps 10 would do. Offers vastly superior extraction to that of wall mounted axial fans. A powerful, 3-speed high quality ball bearing, long life motor can operate at low, medium and high speeds that produces no more than 24dB(A) making it one of the quietest fan available. Continuously rated and warranted for a minimum of 30,000 hours. High quality ball bearing, long life motors, continuously rate and warranted for a minimum of 30,000 hours or 3 years.

Silent operation - Noise is reduced due to the extractor fan being installed in ceiling voids or in the loft Mixflo fans can be mounted in a variety of applications as shown and are suitable for use with either rigid or flexible ducting Designed to produce higher working pressures for applications that require high air flows, with low relative noise. Suitable for long duct runs up to 12m. Fitted with a high quality ball bearing motor, MF100S is continuously rated and guaranteed for a minimum of 30,000 hours or 3 years. The Manrose 4 inch inline fanprovides a high extraction rate whilst keeping noise to a minimum. The mixed flow created by the twin blades enables the fan to pull more air than a conventional extractor fan making it ideal for use in bathrooms and other areas of high humidity.We have a small bathroom, big standard 1930's one, so do you think the 100T when ducted properly should be sufficient? MF100S benefits from 3 speed settings which can be set via dip-switch at installation. This allows the fan to operate at an appropriate rate for user requirements. Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction.