See the Cricut Foil Transfer Tool in action as I create two different foil projects in this step-by-step tutorial video: The Cricut Foil Transfer Tool uses pressure, not heat, to transfer the foil. The 3-in-1 tool (housing plus 3 tips) is simpler to use than the Foil Quill’s 3 separate tools with cards, and no extra power is needed to use the Cricut Foil Transfer Tool. Also, the Cricut Foil Transfer Tool can use the special Foil linetype in three different sizes, while the Foil Quill relies on the Draw linetype. One other important thing: the Foil Quill requires you to remove the pen adapter from one clamp in a Cricut machine clamp and use one of their special adapters to make the Foil Quill fit (removing the pen adapter voids the warranty for Cricut machines). How do the three tips work on the Cricut Foil Transfer Tool? Do you have the right size tip in your Foil Transfer Tool? If you tell your Cricut you’re using the bold tip but actually have the fine tip in, you may have an issue with this.

And yes, before you ask, you CAN cut and foil in the same project. The Cricut Foil Transfer Tool is fully integrated with Cricut Design Space, which lets you combine multiplelinetypes (draw, score, cut, and foil) all in one project. You can even change the Foil Transfer Tool tip in a single project, combining different sizes. This pretty foil feather card was scored, then foiled, then cut — all in my Cricut! The Cricut Foil Transfer Tool works as a companion to your cutting blade and you’ll need both tools to create intricate designs. The housing units on these tools are not interchangeable despite how similar they look to each other. So, be sure to keep both on hand! The Foil Transfer Kit comes with three differently-sized tips: Fine, Medium, and Bold, as well as 12 small (4″ x 6″) foil transfer sheets and tape. I love that there are three different tips, so we can choose the size that works best for our projects. I found I liked the Bold Tip the best, unless my design was particularly small and intricate, and then it was great to have the fine and medium tips.Cricut just introduced a fun new tool and material — the Cricut Foil Transfer Tool and Foil Transfer Sheets! Cricut sent me a Foil Transfer Kit and some extra transfer sheets in advance so I could test it out and tell you all about it! The best thing about the Cricut Foil is how easy it is to use — within minutes of opening the kit I was able to create a beautiful foiled card. I’ve now made a number of different projects with the foil transfer and I’m excited to show you and tell you everything I’ve learned! You’re going to love this!

Did you remove the foil transfer sheet before cutting? If you’re doing a foil transfer and cut in the same project, be sure to remove the foil transfer sheet before you cut, or it will just cut the transfer sheet. Cricut Design Space will prompt you to do this so you don’t forget. What do you think? Are you ready to elevate your creations with stunning foil effects? The Cricut Foil Transfer Kit includes everything you need to get started: Throughout the cut process, Design Space will intuitively prompt you to switch out the Cricut Foil Transfer Tool when needed. It will also eject your mat just enough so that you can remove your used foil and tape in-between steps. No guesswork needed! Is there tape covering any part of your design area? If so, your sheet can tear when the tool goes over the edge of the material. Move the tape so it does not cover your design area. There are so many different possibilities – cards, invitations, gift boxes, and more! We can’t wait to see what you create. If you use the Cricut Foil Transfer Tool in a project, share it with us! Tag @officialcricut and use #CricutFoilTransfer.Store your tips on the magnet bar in your Cricut’s storage compartment to keep them from getting lost! Once your foil transfer sheet is taped, it's time to load your mat into your Cricut to begin the project! STEP 4: SCORE, FOIL, AND CUT OUT YOUR FOIL FEATHER CARD Yes. The Foil Transfer Sheet will not adhere to your base material without pressure, so it needs to be taped down. Tape strips are included with Foil Transfer Sheets. If you run out, use a tape with light adhesive, such as washi tape, painter’s tape, or masking tape. Always test your tape on your base material first to ensure it won’t tear or harm the material when removed. Do I need cut my foil transfer sheet before taping it down?